Installation Procedure

Install the battery (1) into position on the battery tray.

Fig 1: Battery
Courtesy of GENERAL MOTORS COMPANY
Install the battery hold down retainer (2) and tighten the fastener (1) to 8 N.m (71 lb in).

Fig 2: Battery Hold Down Retainer Fastener
Courtesy of GENERAL MOTORS COMPANY
Install the battery positive cable to the battery post and tighten the clamp fastener (2) to 5 N.m (44 lb in).

Fig 3: Protective Cover
Courtesy of GENERAL MOTORS COMPANY
Install the protective cover (1) to the battery positive cable.
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .