Circuit/System Verification
- Vehicle ON.
- Verify DTC P0ABB, P0ABC or P0ABD is not set.
- If any of the DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If none of the DTCs are set
- If any of the DTCs are set
- Verify DTC P1AEC, P1AED, P1AEE or P1AEF is not set.
- If any of the DTCs are set
- Program the T6 Power Inverter Module.
- Verify the DTC does not set.
- If the DTC sets, replace the T6 Power Inverter Module.
- If the DTC does not set.
- All OK
- If none of the DTCs are set
- All OK