LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Camaro SS, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Electronic Brake Control Module
    GM4161878Courtesy of GENERAL MOTORS COMPANY
  1. Install Electronic Brake Control Module (1)
    2. Fig 2: Electronic Brake Control Module Bolts
    GM4161877Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

  2. Install and tighten Electronic Brake Control Module Bolts (1) (Qty: 4) to 3 N.m (27 lb in)
  3. Connect the EBCM electrical connector.
  4. Install Windshield Washer Solvent Container Filler Tube. Refer to Windshield Washer Solvent Container Filler Tube Replacement
  5. Program the EBCM. Refer to Control Module References
scientia non olet · About LEMON Manuals