Electronic Suspension Control Module Replacement

Fig 1: Electronic Suspension Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear compartment floor panel trim. Refer to Rear Compartment Floor Panel Trim Replacement
1	Electronic Suspension Control Module Procedure Disconnect the electrical connector. Remove the control module from the bracket. Program the electronic suspension control module. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure
Remove the rear compartment floor panel trim. Refer to Rear Compartment Floor Panel Trim Replacement

Electronic Suspension Control Module

Procedure

Disconnect the electrical connector.
Remove the control module from the bracket.
Program the electronic suspension control module. Refer to Control Module References .