Fastener Specifications (1.4L LE2)
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Fuse Block to Battery Positive Cable Nut | 12 N.m (106 lb in) |
| Battery Hold Down Retainer Nut | 10 (N.m 89 lb in) |
| Battery Negative Cable to Battery Negative Pole Nut | 4.5 N.m (40 lb in) |
| Battery Negative Cable to Battery Sensor Nut | 11 N.m (97 lb in) |
| Battery Negative Cable to Rear Floor Panel Nut | 22 N.m (16 lb ft) |
| Battery Positive Cable to Battery Positive Pole Nut | 4.5 N.m (40 lb in) |
| Battery Positive Cable to Fuse Block Nut | 9 N.m (80 lb in) |
| Battery Positive Cable (Underbody to Battery Tray) | 12 N.m (106 lb in) |
| Battery Tray Bolt | 22 N.m (16 lb ft) |
| Body Extension Current Sensor Wiring Harness to Battery Negative Cable Bolt | 9 N.m (80 lb in) |
| Body Extension Wiring Harness Bolt | 9 N.m (80 lb in) |
| Engine Control Module Wiring Harness Conduit Nut | 9 N.m (80 lb in) |
| Engine Control Module Wiring Harness Ground Cable Bolt | 9 N.m (80 lb in) |
| Engine Control Module Wiring Harness to Cylinder Head Bolt | 9 N.m (80 lb in) |
| Generator and Starter Cable Generator Lead Nut | 12.5 N.m (111 lb in) |
| Generator and Starter Cable Start Lead Nut | 12.5 N.m (111 lb in) |
| Generator Bolt | 22 N.m (16 lb ft) |
| Generator Nut | 22 N.m (16 lb ft) |
| Starter Bolt | 58 N.m (43 lb ft) |
| Starter Bracket Bolt M8 | 22 N.m (16 lb ft) |
| Starter Bracket Bolt M10 | 58 N.m (43 lb ft) |
| Starter Ground Cable Bolt | 22 N.m (16 lb ft) |
| Starter Nut | 58 N.m (43 lb ft) |