K111 Fuel Pump Driver Control Module
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-2A (GY) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| II | Not Required | J-35616-35 (VT) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 2.5 | RD/BU | 3240 | Battery Positive Voltage | II | - |
| 2 | 0.5 | GY | 5660 | Fuel Pump Controller Data Out Signal | I | - |
| 3 | - | - | - | Not Occupied | - | - |
| 4 | 0.5 0.35 |
BU/BN BU/BK |
4498 7493 |
High Speed GMLAN Serial Data (+) 7 High Speed GMLAN Serial Data (+)3 |
I I |
DU11&LH7 -LH7-N+DU11/-KL9-LH7+DU11 |
| 5 | 0.5 0.35 |
WH WH |
4499 7494 |
High Speed GMLAN Serial Data (-) 7 High Speed GMLAN Serial Data (-)3 |
I I |
DU11+LH7 -LH7+DU11+KL9+N |
| 6 | 0.5 | VT/GN | 39 | Run/Crank Ignition 1 Voltage | I | - |
| 7 | 0.5 | VT/YE | 5985 | Accessory Wakeup Serial Data | I | - |
| 8 | 1.5 | GY | 120 | Fuel Pump Control | II | - |
| 9 | 2.5 | BK | 1950 | Ground | II | - |
| 10 - 14 | - | - | - | Not Occupied | - | - |
| 15 | 0.5 | BARE | 7444 | Fuel System Control Module Shield Ground | I | - |
| 16 | 1.5 | BK/GN | 1580 | Fuel Pump Low Reference | II | - |