Installation Procedure
- Install the front position sensor (3) to the mounting point on the front cradle (2).
- Install the front position sensor retaining nut (1).
Tighten
10 N.m (89 lb in)
- Connect the front position sensor link (1) to the lower control arm ball stud (2).
- Connect the front position sensor harness connector (1) to the front position sensor.
- Reinstall the harness clips (2) to the front position sensor.
- Install the front wheel. Tire and Wheel Removal and Installation .
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution .