LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Silverado 1500 SSV, 4WD, Part Time T/Case Control, Gas/Ethanol >> Repair and Diagnosis >> Body & Frame >> Towing Systems >> Trailer Brake Control System >> Repair Instructions >> Trailer Brake Power Control Module Replacement (JD9) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Trailer Brake Control Module
    GM3268822Courtesy of GENERAL MOTORS COMPANY
  1. Install the trailer brake power control module (1).
    2. Fig 2: Trailer Brake Control Module Bolts
    GM3268818Courtesy of GENERAL MOTORS COMPANY
  2. Holding the trailer brake power control module nuts stationary, install the trailer brake power control module bolts (1) and tighten to 9 (80 lb in).
  3. Connect the trailer brake power control module electrical connector.
  4. Raise and secure the spare tire and wheel assembly.
  5. Program the trailer brake power control module. Control Module References
scientia non olet · About LEMON Manuals