LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Spark LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (HVAC System - Automatic) >> Specifications >> Fastener Specifications
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fastener Specifications

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 
Application
Air Conditioning Evaporator Inlet Tube Seal
Air Conditioning Evaporator Outlet Tube Seal
Air Conditioning Evaporator Thermal Expansion Valve Seal
Heater and Air Conditioning Evaporator and Blower Module Seal
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 
Application Specification
Metric (English)
Air Inlet Valve Actuator Bolt 2.5 N.m (22 lb in)
Heater and Air Conditioning Control Bolt 2.5 N.m (22 lb in)
Mode Control Cam Actuator Bolt 2.5 N.m (22 lb in)
Mode Control Cam Actuator Mounting Plate Bolt 2.5 N.m (22 lb in)
Temperature Valve Actuator Bolt 2.5 N.m (22 lb in)
scientia non olet · About LEMON Manuals