LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2017 >> Traverse LS Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Diagnostic Information and Procedures >> Seat Belt Indicator Malfunction - Driver >> Circuit/System Verification
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit/System Verification

  1. Ignition ON, command the instrument panel cluster lamp test ON and OFF with a scan tool. The driver seat belt indicator should turn ON and OFF when changing between the commanded states.
    • If the indicator does not illuminate, replace the IPC.
  2. Observe the scan tool Driver Seat Belt Switch parameter while connecting and disconnecting the seat belt. The parameter should display Buckled and Unbuckled when changing between seat belt states.
scientia non olet · About LEMON Manuals