LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Hybrid/EV Controls System) >> Repair Instructions >> Accessory DC Power Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disable the high voltage system. High Voltage Disabling
  2. GM4316329Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Generator Control Module Tray (2) - Remove - Drive Motor Generator Control Module Tray Replacement

  3. GM4316486Courtesy of GENERAL MOTORS COMPANY

    High Voltage Electrical Connector (1) - Disconnect

  4. Electrical Connector (2) - Disconnect
  5. Release the retainers. (3)
  6. GM4316679Courtesy of GENERAL MOTORS COMPANY

    Battery Positive Junction Block Cable Bolt (1)@Accessory DC Power Control Module - Remove

  7. Retainer (2) - Disengage
  8. Battery Positive Junction Block Cable (3) - Reposition away
  9. Drive Motor Battery Impact Absorber (4) - Remove
  10. GM4316483Courtesy of GENERAL MOTORS COMPANY

    Accessory DC Power Control Module Nut (1) - Remove [2X]

  11. Accessory DC Power Control Module Bolt (2) - Remove [2X]
  12. Accessory DC Power Control Module (3) - Remove
scientia non olet · About LEMON Manuals