LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2018 >> Spark LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Engine Cooling System) >> Repair Instructions >> Radiator Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Charge Air Cooler Replacement  - Remove
  2. Drain the cooling system. Cooling System Draining and Filling 
  3. Drain the transmission fluid. Transmission Fluid Drain and Fill
  4. Disconnect the automatic transmission fluid pipes from the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  5. Radiator Outlet Hose@Radiator - Remove - Radiator Outlet Hose Replacement 
  6. Radiator Inlet Hose@Radiator - Remove - Radiator Inlet Hose Replacement 
  7. GM4248356
    NOTE:

    Procedure applies also to the other side.

    Remove the 2 radiator upper bracket bolts (1) and the 2 radiator upper brackets (2).

  8. GM4248357

    Pull up the engine coolant fan shroud (1) until it can be put out of the 4 retaining tabs (2, 3).

  9. GM4248358

    Remove the radiator (1) from the vehicle.

scientia non olet · About LEMON Manuals