Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Traverse. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Wheel Speed Sensor (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Retainer (1)@Knuckle - Secure
Courtesy of GENERAL MOTORS COMPANY

Retainer (1)@Rear Toe Link - Secure [2x]
Retainer (2)@Rear Toe Link Bracket - Secure
Courtesy of GENERAL MOTORS COMPANY

Wheel Speed Sensor Electrical Connector (1) - Connect
Retainer (2)@Rear Cradle - Secure
Install the tire and wheel assembly. Tire and Wheel Removal and Installation
Verify the repair is complete. Diagnostic Repair Verification