LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2019 >> Bolt EV Premier >> Repair and Diagnosis >> Electrical >> Charging Systems >> 12 V Starting And Charging >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Battery Current Sensor (2) @ Battery Negative Cable (1) - Install
    GM4546924Courtesy of GENERAL MOTORS COMPANY
  2. Battery Positive and Negative Cable Ground Nut (1) @ Front Wheelhouse Panel - Install and tighten 22 N.m (16 lb ft)
    GM4546923Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  3. Battery Current Sensor (3) Battery Tray - Install
  4. Battery Current Sensor Connector (2) - Connect
  5. Battery - Install - Battery Replacement 
  6. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection 
scientia non olet · About LEMON Manuals