Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Battery Hold Down Retainer Nut | 3.5 N.m (31 lb in) |
| Battery Negative Cable Ground Bolt | 22 N.m (16 lb ft) |
| Battery Positive Cable Junction Block Nut | 15 N.m (11 lb ft) |
| Battery Positive Cable Nut @ Generator | 15 N.m (11 lb ft) |
| Battery Positive Junction Block Cable Nut | 15 N.m (11 lb ft) |
| Battery Positive Post Clamp Nut | 5 N.m (44 lb in) |
| Battery Post Negative Cable Clamp Nut | 5 N.m (44 lb in) |
| Body Harness Ground Fastener | 9 N.m (80 lb in) |
| Engine Wiring Harness Junction Block Nut | 15 N.m (11 lb ft) |
| Front Compartment Fuse Block Nut | 15 N.m (11 lb ft) |
| Generator Bolt | 58 N.m (43 lb ft) |
| Rear Body Fuse Block Nut | 15 N.m (11 lb ft) |
| Starter Heat Shield Fastener | 9 N.m (80 lb in) |
| Starter Mounting Bolt | 58 N.m (43 lb ft) |
| Starter Solenoid Cable Nut | 15 N.m (11 lb ft) |