LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2019 >> Suburban 3500 HD LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Apply a light coat of wheel speed sensor anti-corrosion grease to the wheel speed sensor and mounting pad on the wheel hub and bearing assembly. Adhesives, Fluids, Lubricants, and Sealers 
  2. GM4138374Courtesy of GENERAL MOTORS COMPANY

    Wheel Speed Sensor (1) - Install

  3. GM4138372Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

    Wheel Speed Sensor Bolt (1) - Install and tighten to 13 N.m (115 lb in)

  4. GM4138369Courtesy of GENERAL MOTORS COMPANY

    Wheel Speed Sensor Harness Clip (1) - Secure

  5. GM4138368Courtesy of GENERAL MOTORS COMPANY

    Wheel Speed Sensor Harness Clip (1) - Secure

  6. Wheel Speed Sensor Harness Clip (2) - Secure
  7. GM4138367Courtesy of GENERAL MOTORS COMPANY

    Wheel Speed Sensor Harness Clip (1) - Secure

  8. Wheel Speed Sensor Harness Clip (2) - Secure
  9. Wheel Speed Sensor Electrical Connector - Connect
  10. Front Brake Rotor Replacement (JD9, JB1)Front Brake Rotor Replacement (J95) - Install
  11. Perform the vehicle diagnostic system check. Diagnostic System Check - Vehicle
scientia non olet · About LEMON Manuals