LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2020 >> Express 2500 LS, 2.8L Eng VIN 1 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> P16 Instrument Cluster: Programming and Setup >> Replace and Program ECU or Reprogram ECU
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Replace and Program ECU or Reprogram ECU

To program a replacement or an existing ECU, perform the following procedure:

    NOTE:

    Programming this ECU using SPS does not program the odometer value. The odometer information will be pre-programmed to the replacement instrument cluster.

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select P16 Instrument Cluster - Programming and follow the on-screen instructions.
  3. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
scientia non olet · About LEMON Manuals