Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Install the battery (1) into position on the battery tray.
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Install the battery retainer (2) and tighten the fastener (1) to 10 N.m (88 lb in).
Courtesy of GENERAL MOTORS COMPANY

Install the battery fuse block (2) to the battery with the retainers (1).
Courtesy of GENERAL MOTORS COMPANY

Install the battery positive cable (2) to the battery fuse block and tighten the fastener (1) to 12 N.m (106 lb in).
Install the battery hold-down strap (4) to the battery positive post.
Install the battery positive clamp to the post and tighten the fastener (3) to 4.5 N.m (44 lb in).
Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
Courtesy of GENERAL MOTORS COMPANY

Close the cover (2) on the battery fuse block.
Courtesy of GENERAL MOTORS COMPANY

Install the battery cover (2) with the retaining tabs (1).
Perform the battery sensor module learn program. Refer to Battery Sensor Module Learn