Typical Scan Tool Data
The Typical Scan Tool Data table identifies a scan tool data parameter and its value in reference to potential circuit faults.
An example table from an ECT procedure:
ECT Sensor
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions:
Engine = Idling - At normal operating temperature. Parameter Normal Range: 88 to 105°C (190 to 221°F) |
|||
| Signal | 140°C (248°F) | -40°C (-40°F) | -40°C (-40°F) |
| Low Reference | - | -40°C (-40°F) | - |