LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2021 >> Silverado 1500 SSV, RWD, Gas >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Functions >> Repair Instructions >> Remote Function Actuator Module Replacement (Crew Cab, Double Cab) >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

GM5034586Courtesy of GENERAL MOTORS COMPANY
  1. Remote Function Actuator Module (1) - Install
  2. Secure the retaining tabs.
  3. Connect the electrical connector.
    GM5027777Courtesy of GENERAL MOTORS COMPANY
  4. Route the seat belt webbing through the right side body lock pillar garnish molding (1).
  5. Body Side Rear Window Garnish Molding-Right Side (1) - Install
    CAUTION:

    Refer to Fastener Caution .

  6. Quarter Window Trim Finish Panel Bolt-Right Side (2) - Install and tighten - Fastener Specifications
    GM5651585Courtesy of GENERAL MOTORS COMPANY
  7. Reposition the right side rear seat belt retractor anchor plate (2) back under the rear floor panel carpet.
  8. Rear Seat Belt Retractor Anchor Plate Bolt-Right Side (1) - Install and tighten - Fastener Specifications
  9. Enable the SIR System. SIR Disabling and Enabling
scientia non olet · About LEMON Manuals