Installation Procedure
Place the front side door window (1) into the door frame.
- Place the front side door window (1) in the full up position and tape in place.
Front Side Door Window Channel Front Retainer(2) - Install
- Front Side Door Window Channel Front Retainer Bolt (1) - Install and tighten [2x] - Fastener Specifications
Place the window regulator sash retainer (1) in the full up position.
- Remove the tape holding the front side door window in the full up position.
Front Side Door Window Belt Reveal Molding(2) - Install
- Starting from the front and working to the back, press firmly to install the front side door window belt reveal molding (2) onto the door flange.
- Front Side Door Window Belt Reveal Molding Bolt(1) - Install and tighten - Fastener Specifications
Front Side Door Inner Window Sealing Strip(1) - Install
- Press firmly to install the front side door window inner sealing strip (1) back onto the door flange.
Ensure that the door weatherstrip is not trapped below the window garnish molding (2) once completely installed. Reposition the weatherstrip as necessary.
- Front Side Door Window Garnish Molding(2) - Install
- Front Side Door Window Garnish Molding Retainer(1) - Install
- NOTE:
When reinstalling water deflector ensure integral locators are installed properly and that water deflector is secured and leakproof.
Route front side door inside handle cable through hole in deflector (1).
- Front Side Door Water Deflector(1) - Install
Front Side Door Pull Handle Bracket(2) - Install
- Front Side Door Armrest Bracket Bolt(1) - Install and tighten [2x] - Fastener Specifications
- Front Side Door Trim - Install - Front Side Door Trim Removal and Installation
- Enable the SIR System. SIR Disabling and Enabling
CAUTION:
Refer to Fastener Caution .