LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2021 >> Traverse L >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance Systems >> Diagnostic Information and Procedures >> DTC B094C >> Circuit/System Verification
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Circuit/System Verification

  1. Ignition ON.
  2. Verify that B094B 45 or B094C 45 is not set.
    • If DTC is set 
    1. Program the appropriate B218 Side Object Sensor Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the appropriate B218 Side Object Sensor Module.
      • Go to next step: If the DTC does not set
    3. All OK.
    • Go to next step: If DTC is not set 
  3. Verify that B094B 00, B094C 00, B094B 08, B094C 08, B094B 54 or B094C 54 is not set.
    • If DTC is set 

      Replace the appropriate B218 Side Object Sensor Module.

    • Go to next step: If the DTC is not set 
  4. Verify that B094B 58 or B094C 58 is not set.
    • If DTC is set 

      Verify the area in front of the sensor is clean, unobstructed, and damage-free.

    • If not clean, unobstructed, and damage-free, clean or repair as necessary.
    • If clean, unobstructed, and damage-free, replace the appropriate B218 Side Object Sensor Module.
    • Go to next step: If DTC is not set 
  5. Verify the side blind zone alert system indicators located in the outside rearview mirrors briefly turn ON and then OFF during the system self test when ignition is turned ON.
    • If the side blind zone alert system indicators do not briefly turn ON and OFF 

      Refer to Circuit/System Testing

    • Go to next step: If both side blind zone alert indicators briefly turn ON and OFF 
  6. All OK.
scientia non olet · About LEMON Manuals