Circuit/System Verification

Test drive the vehicle at speeds greater than 16 km/h (10 MPH).
Verify all scan tool Wheel Speed Sensor parameters are within 4 km/h (2.5 MPH) of each other.
- If any parameter is not within 4 km/h (2.5 MPH) of each other
  Refer to Circuit/System Testing.
- Go to next step: If each parameter is within 4 km/h (2.5 MPH) of each other
Verify DTC C0035, C0040, C0045, or C0050 is not set.
- If any of the DTCs are set
  Diagnose each wheel speed sensor individually, refer to Circuit/System Testing.
- Go to next step: If none of the DTCs are set
All OK.