Removal Procedure

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Lifting and Jacking the Vehicle
Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Quantity of fasteners may vary based on option content.

Engine Front Splash Shield Retainer (3) - Remove[2x]
Engine Front Splash Shield Bolt(1) - Remove[5x]
Engine Front Splash Shield(2) - Remove
Courtesy of GENERAL MOTORS COMPANY
NOTE:
- Left side shown, right side similar.
- Some components not shown for graphic clarity.
- It is not necessary to remove the wheelhouse liner to gain access to the electrical connector.
Pull the front wheelhouse liner outwards to gain clearance to disconnect the electrical connector (1).
Electrical Connector(1) - Disconnect
Release the retainers (2) and remove the front wheel speed sensor harness from the retainers (2).
Courtesy of GENERAL MOTORS COMPANY

Front Wheel Speed Sensor Bolt(1) - Remove
Front Wheel Speed Sensor(2) - Remove