Installation Procedure

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Vehicle Stability Control System Switch(1) - Install
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connectors.
Front Floor Console Cup Holder(1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Front Floor Console Cup Holder Bolt(1) - Install and tighten[8x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Wireless Charging System Module(2) - Install
Wireless Charging System Module Bolt(1) - Install and tighten[4x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Trim Plate(1) - Install
Connect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Trim Plate Bolt(2) - Install and tighten[2x] - Fastener Specifications
Front Floor Console Variable 1 Liner(1) - Install
Courtesy of GENERAL MOTORS COMPANY

Slide the front floor console (1) back into the instrument panel.
Courtesy of GENERAL MOTORS COMPANY

Engage the tabs (3) on both sides of the front floor console.
Connect the front floor console harness connector on both sides of the front floor console.
Front Floor Console Bolt(1) - Install and tighten[6x] - Fastener Specifications
Front Floor Console Bracket Bolt(2) - Install and tighten[2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Extension Panel - Right Side(1) - Install
Return the seat to its original position.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Extension Panel - Left Side(1) - Install
Return the seat to its original position.