Removal Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If tether or curtain airbag are damaged in any way, they must be replaced.
CAUTION:
Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced.
Disable the SIR system. SIR Disabling and Enabling
- Pull the windshield garnish moldings rearwards to release the tether from the A pillar.
- Access the bolt which is located on the backside of the garnish moldings and secures the tether to the A pillar.
- Windshield Garnish Molding Bolt (2) - Remove [ 2x ]
- Disconnect the electrical connectors.
- Windshield Garnish Molding (1) - Remove [ 2x ]
Using a flat-bladed plastic trim tool, release the retaining clips.
- Disconnect the electrical connector.
- Instrument Panel Extension (1) - Remove
Forward Collision Alert Display Bolt (1) - Remove [ 2x ]
- Forward Collision Alert Display (2) - Remove