Replace and Program B174W Frontview Camera - Windshield or Reprogram B174W Frontview Camera - Windshield
WARNING: This page is about a different car, the 2020 Chevrolet Silverado 1500. However, it is still accessible from the selected car via links, so may be relevant.
To program a replacement or an existing B174W Frontview Camera - Windshield, perform the following procedure:
- Access the Service Programming System (SPS) and follow the on-screen instructions.
- On the SPS Supported Controllers screen, select B174W Frontview Camera - Windshield Programming and follow the on-screen instructions.
- On the SPS Supported Controllers screen, select B174W Frontview Camera - Windshield Configuration and follow the on-screen instructions.
- Clear DTCs
- Following B174W Frontview Camera - Windshield replacement and/or reprogramming, the module must be calibrated. Refer to Front View Camera Module Learn .
NOTE:
After programming, a current DTC may be set in the B174W Frontview Camera - Windshield that is unable to be cleared. This is normal and an indicator that the B174W Frontview Camera - Windshield is in learn mode.