Installation Procedure
WARNING: This page is about a different car, the 2020 Chevrolet Silverado 1500. However, it is still accessible from the selected car via links, so may be relevant.
Low Frequency Rear Bumper Antenna (1) - Install
- Secure the retaining tab.
Connect the electrical connectors.
- Ignition Lock Key Transmitter Antenna Bracket (1) - Install
- Secure the retaining tabs.
License Plate (2) - Install
- Rear License Plate Bolt (1) - Install and tighten [2x] - Fastener Specifications
CAUTION:
Refer to Fastener Caution .