LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2024 >> Corvette Z06, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 96 (Programming And Setup (E-Ray)) >> Repair Instructions >> K244 Battery Management Control Module Programming and Setup >> Replace and Program Control Module or Reprogram Control Module
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Replace and Program Control Module or Reprogram Control Module

WARNING: This page is about a different variant/trim than selected.
NOTE:

Due to K16 Battery Energy Control Module having the same diagnostic address as the K244 Battery Management Control Module (12V), when looking at the calibrations page, SPS will display K16 as the controller, not K244. This is normal.

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K244 Battery Management Control Module - Programming and follow the on-screen instructions.
  3. Clear DTCs.
  4. All OK.