LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2025 >> Tahoe SSV >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Steering Column Control Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. GM6730281Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Some components not shown for graphic clarity.

    Steering Column Control Module (1) - Install

  2. GM6730261Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Some components not shown for graphic clarity.

    CAUTION:

    Refer to Fastener Caution .

    Steering Column Control Module Bracket Bolt (1) - Install and tighten [2x] - Fastener Specifications 

  3. Connect the electrical connectors. (2)
  4. GM5568663Courtesy of GENERAL MOTORS COMPANY

    Floor Front Air Outlet Duct (1) - Install

  5. GM5002004Courtesy of GENERAL MOTORS COMPANY

    Floor Front Air Outlet Duct Bolt (1) - Install and tighten - Fastener Specifications

  6. GM5515685Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Insulator - Left Side (1) - Install

  7. Connect the electrical connectors and install the wiring harness retainers as necessary.
  8. GM5515684Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Insulator Retainer (1) - Install [2x]

  9. Program the steering column control module. Control Module References