LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1986 >> Laser XT, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Cruise Control Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cruise Control Switch

  1. Disconnect 4-wire connector at steering column. Connect a 12-volt positive source to Yellow wire terminal in speed control harness connector (male). Attach 1 lead of test lamp to ground and the other to Brown/Red terminal. Lamp should light and then go out when the speed set button is depressed.
  2. Move test lamp lead to Dark Blue/White wire terminal. Lamp should light with switch in "ON" position. Lamp should go out when switch is moved to "OFF" position. With switch in "ON" position, move test lamp lead to White/Red wire terminal.
  3. Lamp should light when speed set button is depressed or switch moved to "RESUME" position. If switch does not operate properly in all tests, replace it.
scientia non olet · About LEMON Manuals