LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1988 >> Conquest Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> Testing >> Ignition Module Test >> Chrysler Motors
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Chrysler Motors

Connect ignitor, test light and battery. See Fig 1. Using a dry cell battery or continuity tester, apply voltage to signal input terminal of ignitor unit. Test light should light when voltage is applied, and go out when voltage is removed. If not, ignitor is bad.

NOTE: This test can only determine when ignitor is bad. Even if ignitor tests good, it could still be defective.
Fig 1: Checking Ignitor With Battery & Test Light
G29008Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals