LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1988 >> Conquest Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Adjustments >> Accelerator Cable
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Accelerator Cable

  1. Warm engine to normal operating temperature. Turn ignition off. Ensure sharp bends are not present in accelerator cable. Ensure inner cable has slack.
  2. With engine off, turn ignition switch to "ON" position for 15 seconds. Loosen accelerator cable adjusting nut (located in engine compartment) so throttle lever is free. Turn accelerator adjusting nut to a position where throttle lever just begins to move. Back-off adjusting nut 1/2 turn and tighten lock nut.
scientia non olet · About LEMON Manuals