October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Injector Resistor

Disconnect electrical connector from resistor. Connect Harness (MD998459) to resistor side of disconnected connector. Measure resistance across terminals No. 1 and 2, then No. 1 and 3. See Fig 1 . Resistance should be between 5.5 and 6.5 ohms in both cases. If not, replace resistor.

Fig 1: Measuring Injector Resistor Resistance

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.