LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1993 >> Imperial >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - BENDIX-10 >> Diagnosis & Testing >> DRB-II Test Functions >> ABS Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ABS Mode

  1. To perform ABS self-diagnostic tests, DRB-II must be in ABS mode. Access DRB-II main menu. See ENTERING DRB-II MAIN MENU in the heading above.
  2. At DRB-II main menu, press "4" (SELECT SYSTEM) key to enter diagnostic test program. Press down arrow 3 times to change menu display.
  3. Press "5" (ABS) key to enter ABS mode of DRB-II program. ABS menu will appear after a few seconds. Select ABS type. Screen will display a partial menu of DRB-II test categories for ABS. Press down arrow 3 times to view rest of menu.
  4. Following test functions can be accessed from ABS menu: SYSTEM TESTS, READ FAULTS, STATE DISPLAY, ACTUATOR TESTS and ADJUSTMENTS.
    • SYSTEM TESTS Not available in ABS diagnostic program.
    • READ FAULTS Allows user to read fault messages.
    • STATE DISPLAY Allows user to read states or values of a variety of sensors, inputs/outputs and components.
    • ACTUATOR TESTS Allows user to activate various outputs, valves and hydraulics to verify proper operation.
    • ADJUSTMENTS Allows user to erase fault messages.
scientia non olet · About LEMON Manuals