October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Enabling Ignition System
- When testing and/or repairs are completed verify battery condition. Recharge battery as required, after starter tests have been completed. Disconnect all test equipment. install ASD relay.
- On models with conventional distributor ignition, disconnect jumper wire and connect ignition coil secondary wire to distributor cap. On models with direct ignition system, connect coil pack electrical connector. See Figure
. On all models, start engine several times to verify malfunction has been corrected.