LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1995 >> LHS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Test 19A >> Right Front Inlet Valve
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Right Front Inlet Valve

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagram, see WIRING DIAGRAM.
  1. Using scan tool, read trouble codes. If MAIN RELAY/POWER CIRCUIT FAILURE is displayed, go to TEST 14A. If MAIN RELAY/POWER CIRCUIT FAILURE is not displayed, go to next step.
  2. Turn ignition off. Disconnect CAB from HCU. See Figure . Inspect 14-pin connector. If 14-pin connector is faulty, repair as necessary. Perform TEST VER-1A. If valve block connector terminals are backed-out, replace HCU. Perform TEST VER-1A. If connector is okay, go to next step.
  3. Using an external ohmmeter, check resistance between valve block connector terminals No. 6 and 7. See Figure . If resistance is not 5-8 ohms, replace HCU. Perform TEST VER-1A. If resistance is 5-8 ohms, replace CAB. Perform TEST VER-1A.
scientia non olet · About LEMON Manuals