DRB Continuity Meter Mode
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Press VOLT/OHM key 3 times to enter mode. Screen will display NO CONTINUITY message. Touch test probe to connector or wire to be measured. Reading will be displayed on DRB screen. When continuity testing is complete, press VOLT/OHM key once to exit continuity meter mode.