LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1995 >> Sebring LXi >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Scan Tool

  1. Ensure battery is fully charged. Attempt to start engine. Turn ignition switch to OFF position. Connect scan tool to Data Link Connector (DLC), located below driver's side of instrument panel.
  2. Turn ignition switch to ON position. Using scan tool manufacturer's instructions, record all DTCs displayed on scan tool. Using all DTCs obtained, proceed to DTC MESSAGES & CODES  table in SELF-DIAGNOSTICS TESTS. Perform all indicated repairs. After all repairs are completed, ensure DTCs are cleared from PCM. See CLEARING DIAGNOSTIC TROUBLE CODES .
scientia non olet · About LEMON Manuals