LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1996 >> Sebring JXi >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Convertible >> Bleeding Brake System >> Bleeding Procedures >> Manual Bleeding
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Manual Bleeding

  1. Fill master cylinder. Install clear vinyl bleeder hose onto bleed screw at first wheel to be serviced. See BLEEDING SEQUENCE . Place other end of hose in clean transparent container.
  2. Partially fill container with clean brake fluid. Submerge end of hose in fluid. Open bleed screw 1-2 turns. Slowly depress brake pedal through its full travel.
  3. Close bleed screw. Release pedal. Pump pedal several times to push air toward wheel cylinders. Repeat procedure until brake fluid flows clear and free of bubbles. Proceed to next bleed screw of brake bleeding sequence.
NOTE: Check fluid level in master cylinder frequently when bleeding.
scientia non olet · About LEMON Manuals