Headlamp Control Module: Service and Repair

The headlamp module contains the park and turn signal lamps and is serviced as an assembly.

REMOVAL
1. Release hood latch and open hood.

Headlamp Module:

2. Remove screws holding headlamp module to radiator closure panel.
3. Separate headlamp module from radiator closure panel.
4. Disengage wire connector from back of head- lamp bulb.
5. Rotate Park lamp socket counterclockwise one quarter turn.
6. Pull socket from back of lamp.
7. Separate headlamp module from vehicle.

INSTALLATION
- Reverse the preceding operation.