Headlamp Module Mount Adapter - LH/CP

REMOVAL
1. Remove headlamp module.
2. Remove park and turn signal lamp.

Headlamp Module Mount Adapter:

3. From behind front bumper fascia, remove bolts holding mount adapter to radiator closure panel.
4. Remove radiator grille.
5. Remove bolts holding top of mount adapter to radiator closure panel.
6. Separate mount adapter from vehicle.

INSTALLATION
1. Place mount adapter in position on vehicle.
2. Install bolts to hold top of mount adapter to radiator closure panel.
3. Install radiator grille.
4. From behind front bumper fascia, install bolts to hold mount adapter to radiator closure panel.
5. Install park and turn signal lamp.
6. Install headlamp module.
7. Verify headlamp bubble level and arrow calibration and headlamp alignment.