Headlamp Module - LH/CP

REMOVAL
1. Release hood latch and open hood.
2. Remove radiator closure panel sight shield as necessary to gain access to headlamp fasteners.

Headlamp Module:

3. Remove screws holding headlamp module to mount adapter.
4. Separate headlamp module from mount adapter.
5. Disengage wire connectors from headlamp and fog lamp.
6. Separate headlamp from vehicle.

INSTALLATION
1. Engage wire connectors to headlamp and fog lamp.
2. Place headlamp module in position on mount adapter.
3. Install screws to hold headlamp module to mount adapter.
4. Install radiator closure panel sight shield.