LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - TEVES Mark 20 >> Removal & Installation >> Front Wheel Speed Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Wheel Speed Sensor: Installation

CAUTION: Proper installation of front WSS wiring harness is critical to provide proper ABS operation. Ensure wiring harness is properly installed in all retainers to prevent contact with moving parts and/or over-extension, resulting in open circuit.
  1. Ensure front WSS hole in steering knuckle is clean. Apply light coat of high-temperature multipurpose grease on WSS-to-steering knuckle contact areas.
  2. Install front WSS in steering knuckle. Ensure WSS is fully seated. Install and tighten front WSS-to-steering knuckle bolt to specification. See TORQUE SPECIFICATIONS  .
  3. Front WSS air gap should be .017-.067" (.42-1.71 mm). Front WSS air gap is non-adjustable. To install remaining components, reverse removal procedure. Ensure locking tab on electrical connector is securely locked in place and wiring harness is properly routed. Tighten wheel lug nuts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals