LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - TEVES Mark 20 >> Removal & Installation >> Integrated Control Unit >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Integrated Control Unit: Installation

  1. To install, reverse removal procedure. Tighten 3 ICU-to-mounting bracket bolts to specification. See TORQUE SPECIFICATIONS  . Ensure 25-pin connector seal is properly installed in connector. Position 25-pin connector in socket on CAB and fully seat into socket. Push in connector lock to lock connector into place on CAB.
  2. Install brakelines on HCU and tighten to specification. To complete installation, reverse removal procedure. Using scan tool, initialize ICU. Bleed base brake system and HCU. See BLEEDING BRAKE SYSTEM  . Test drive vehicle to ensure base brake system and ABS operate properly.
scientia non olet · About LEMON Manuals