LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing - (Except Avenger & SEBRING Coupe) >> Ignition Systems >> Ignition Coil >> 2.5L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil: 2.5L

  1. Disconnect distributor 2-pin connector. Using an ohmmeter, measure resistance between terminals. If resistance is .6-.8 ohm, go to next step. If resistance is not .6-.8 ohm, replace ignition coil.
  2. Measure resistance between coil tower and each terminal of distributor 2-pin connector. Resistance should be 12,500-18,000 ohms. If resistance is not as specified, replace ignition coil.
scientia non olet · About LEMON Manuals