Resonator - Left Rear: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Install the left rear resonator/pipe assembly onto the muffler/front resonator assembly and loose assemble the accompanying clamp (Figure ) or (Figure ).
- Install exhaust system (Refer to EXHAUST SYSTEM ).
- Align exhaust components for proper clearance. Tighten all band clamps to 61 N.m (45 ft. lbs.).
- Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
- Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.