LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Frame System & Bumper System) >> Rear Fascia - Intrepid >> Installation - Intrepid
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation - Intrepid

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the license plate lamp wire connector to the body harness.
  2. Place rear fascia in position on vehicle, by fitting foam to bumper beam.
  3. Install center fastener to lower trunk panel.
  4. Snap sides of fascia between quarter panel and bracket.
  5. Install fasteners attaching fascia to rear quarter panel and splash shields.
  6. Install the remaining fasteners to lower trunk panel.
scientia non olet · About LEMON Manuals