Removal & Installation: Receiver-Drier: Installation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, and 2002 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
- Install the small line from the receiver/drier to expansion valve on the NEW receiver/drier. Install the receiver/drier in the vehicle. Install the A/C line at the receiver/drier. Tighten the fastener.
- Install the receiver/drier bracket in the strut tower. Install the nut retaining the A/C line to the expansion valve. Install the bolt to the receiver/drier bracket.
- Install the engine air inlet tube and the air distribution duct on vehicles equipped with 3.2L and 3.5L engine. Evacuate and charge the refrigerant system. See RECOVERY, EVACUATION & RECHARGING in GENERAL SERVICING PROCEDURES article in GENERAL SERVICING.