RECIRCULATION Door Actuator: Installation
WARNING: This page is about a different car, the 2003 Dodge Intrepid, 2003 Chrysler Intrepid, 2003 Chrysler Concorde, and 2003 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the wire harness connector to the recirculation door actuator.
- Install the recirculation door actuator on the HVAC housing, making sure its keyed shaft is positioned properly.
- Install the three fastener screws and tighten to 2.2 N.m (20 in. lbs.).
- Install the instrument panel.
- Connect the negative battery cable remote terminal to the remote battery post.